34
Online Firmware Update
Automatic detection and upgrade of Soundbar software:
1. Ensure your Soundbar and Subwoofer are both powered
up.
2. Ensure your Soundbar and Subwoofer pair successfully.
3. Ensure your Soundbar is connected to Wi-Fi network
successfully (Refer to Wi-Fi connection steps on page
28/29/30/32.)
4. You will see the following LED indications:
DOWNLOADING > > CHECK > UPGRADE > UPG00~99
> U OK > START
Note: Do not interrupt the Soundbar and subwoofer during
the upgrading.
WIFI
wifi Connecte
d
U
U
Updating
H
E
L
L
O
CHECK
UPGRADE
Updating
DOWNLOADING
99upg00
u ok
START
To Next Page
Loading...
