12
Dynamic IP
Click Apply. The IP address and related configuration settings such
as subnet mask and default gateway are all automatically assigned.
Static IP
Access the Internet using a fixed IP address, subnet mask, gateway
IP address and Primary DNS server. This information should be
provided by your network service provider.
PPPoE
Point‑to‑Point Protocol over Ethernet (PPPoE) is a network protocol
that is mainly used for DSL services whereby individual users
connect to a modem using an ethernet connection.
Enter the account number and password provided by your network
service provider, and click Apply.
Mode 2: 4G
Connect the CPE via cellular network. For details, see '2.4 Access CPE network' on page
5.
Roaming
You can connect to the roaming network of this CPE when this function is enabled. It's
disabled by default.
Statistics Settings
With this feature, you can set your billing day, monthly data plan, time limit, etc. Click Apply
after making the preferred changes.
Wi-Fi Settings
Wi-Fi Switch
Select Enabled to enable the Wi‑Fi function, and Disabled to disable it.
SSID Settings
You can set three SSID presets (Main SSID, SSID1 and SSID2); click Apply after making any
changes.
Network Name
(SSID)
SSID is the name of the Wi‑Fi network.
SSID Broadcast
This function is enabled by default.
When this function is disabled, other users cannot detect the SSID or
the Wi‑Fi name. They need to manually enter the SSID and password
to connect to your CPE network.
Security Mode
The available security modes include OPEN, WPA2‑PSK(AES) and
WPA/WPA2‑PSK(TKIP/AES).
WPS Settings
WPS is a wireless network security standard that tries to make connections between your
CPE and wireless devices faster and easier.
If your wireless device is WPS‑supported, you can access the CPE Wi‑Fi network through a
WPS connection.
To Next Page
Loading...
Need help?
General
