TCL LINKHUB 5G

CJB1YM001AAB
1
5
6
7
8
9
10
2
3
4
1. 5G network indicator
•Solidblue:thesignalisstrong.
•Solidyellow:thesignalisgood.
•Solidred:thesignalisweak.
•Off:the5Gnetworkisnotworking.
2. 4G network indicator
•Solidblue:thesignalisstrong.
•Solidyellow:thesignalisgood.
•Solidred:thesignalisweak.
•Off:the4Gnetworkisnotworking.
3. Wi-Fi/WPS indicator
•Blinkingblue:WPSconnectionisavailable.
•Solidblue:Wi-Fiisenabled.
•Off:Wi-Fiisdisabled.
4. Power indicator
•Solidblue:thedeviceison.
•Blinkingblue:thedeviceisperformingfactoryresetorfirmware
update.
•Off:thedeviceisoff.
5. Power button
•Pressfor3secondstopoweroffyourdevice.
•Pressfor1secondtopoweronyourdevice.
6. WPS button
Pressthebuttonfor3secondstoenabletheWPSfunction.TheWPS
functionwillbeautomaticallydisabledifaWPSconnectionisnot
establishedwithin2minutes.
7. WAN/LAN port
Usedtoconnecttoaninternetsourceorwireddevicessuchas
computersorswitches.
8. LAN port
Usedtoconnecttowireddevicessuchascomputersorswitches.
9. Telephone port
Connectatelephonetomakeoranswercalls.
10. Power connector
Usedtoconnecttothepoweradapter.
1
2
3
1. Micro USB port
Itisintendedfordebuguseonly.
2. Nano SIM card slot
InsertananoSIMcardintheslot.
3. Reset button
Useapapercliptopressthebuttonfor3secondstoresetthedevice.
HH515V
www. tcl.com
Quick Start Guide
1
2
NOTE
:DonotremovetheSIMcardwhenyourCPEisinuse.
•Toestablishawirednetworkconnection,connectthewireddevicetotheLANportofyour
CPEusinganEthernetcable.
•Toestablishawirelessnetworkconnection,searchfortheWi-Finameonyourwireless
devices.ThedefaultWi-Finame(ortheSSID)andpasswordcanbefoundonthebottom
labelofyourCPE.
•ToconfiguretheCPEWi-Finetwork,openawebbrowseronthedeviceconnectedtothe
CPEnetworkwiredlyorwirelessly,thengotohttp://192.168.1.1andfollowtheon-screen
instructions.
NOTE
:
Forthedefaultlogininformation,refertothebottomlabelofyourCPE.
©2022TCLCommunicaonLtd.Allrightsreserved
.

TCL LINKHUB 5G Specifications

General

5G Connectivity	Yes
Wi-Fi Standard	Wi-Fi 6 (802.11ax)
Wi-Fi Speed	Up to 3.6 Gbps
Ethernet Ports	2 x Gigabit Ethernet
SIM Card Slot	Nano SIM
Security	WPA3
Antenna	Internal and External Antenna Ports (TS9)

Summary

Device Indicators and Ports Overview

Network Signal Indicators

Explains the meaning of LED states for 5G, 4G network strength, and Wi-Fi/WPS status.

Device Buttons and Ports

Details the functions of the power indicator, power button, WPS button, and various ports.

SIM Card and Device Reset

Nano SIM Card Insertion

Instructions on how to properly insert a nano SIM card into the device's slot.

Device Reset Procedure

Guide on using a paperclip to press the reset button for a factory reset.

Connecting to the Network

Wired Network Connection

Steps to establish a wired connection using an Ethernet cable to the LAN port.

Wireless Network Setup and Configuration

Instructions for wireless connection and configuring the CPE via a web browser.