19
Chapter 3 - Using the Remote Control
Remote Control Buttons
1. MEDIA –
Press the MEDIA button to enter the
USB menu directly.
2. Alphanumeric Buttons – Using these
buttons, enter channel numbers. To enter a
channel, press the number buttons and press OK
(or let the entry timeout).
To enter a digital channel with a sub-channel,
HQWHUWKHPDLQFKDQQHOWKHQSUHVVWKHGRWWKH
sub-channel, and then the OK button.
3. MENU – Press the MENU button to display the
Main Menu.
4. Arrows ( / / / ) – Use the four arrows to
KLJKOLJKWGLIIHUHQWLWHPVLQWKH79PHQXDQGWR
adjust the menu controls.
5. MUTE – Press to turn the volume on and off.
6. FORMAT – Press to select the FORMAT desired.
7. VOL+/- – ,QFUHDVHVRUGHFUHDVHVWKH79YROXPH
8. FAV – Press the FAV button to browse the
channels in your favorite list. Use the up and
down arrows ( ) to highlight options, then press
OK to select. Or, press the FAV button repeatedly
to cycle through your favorite channels.
9. GUIDE – Press the GUIDE button to display the
program guide. Program guide details are only
available on digital channels.
10. POWER (
) – Press the POWER button to turn
WKH79RQDQGRII
11. INPUT – Press the INPUT button to open the
InputOLVWWKHQSUHVVWKHINPUT button repeatedly
to select the video input, or press the up and down
arrows (
)
to highlight options, and press OK to
select the desired option.
12. CLEAR – Press the CLEAR button to remove any
menu or display from the screen and return to
normal viewing.
13.OK – :KHQWKH79LVLQWKH0HQXV\VWHPSUHVV
the OK EXWWRQWRFRQ¿UP\RXUVHOHFWLRQ
14.GO BACK – Pressing the GO BACK button
returns you to the previously viewed channel.
15.CH + or CH - – Press the CH+/- buttons to select
channels and external input mode.
16.INFO – If no menus are currently active, press the
INFO button to display the Channel Banner.
17.These buttons can be used for playing music and
photos in the USB menu.