must adjust HDMI, the
other maybe not to change
Each source must adjust normal first.
Normal of HDMI is the basic data of white
balance of every source and use the HDMI 1
source.
Normal of other source is the offset on normal of
HDMI too. The AV use the AV 1 source.
The parameter of ATV is same as AV and the
DTV is same as HDMI.
If white balance init is not do, this item will be
On.
No need to change anything, if change, you must
do White balance initial.
8.2 Main\Service menu
Need select the project ID
8.3 The following IC should be pre-copied before SMT process:
To Next Page
Loading...
Need help?
General
