TCL L49E7800UDS User Manual

Date
2013/12/2
Page 12
- 5 -
- 5 -
Index
Draft
of 12 Pages
Name
Picture Frequency
Channel band
VHF-L
VHF-H
UHF
2.4.3 CVBS
2.5.5.1 CVBS input
Connect AV cable with CVBS and audio L, R signal to P901 .
Change the display source to CVBS
Test Pattern
SMPTE RP-133
32-step greyscale
Format
NTSC M
(Generated by Chroma2327)
NTSC M
(Generated by Chroma2327)
3 Video Alignment
On MS1368K-LA platform, Alignment items could be achieved by using serial port with
UART protocol, P1002 USB port could be used for UART purpose, pin definition is as
follows:
Pin 9----RXD;
Pin 8---TXD;
Before carry out the alignment, it is very important to make sure the Project ID is correct.
Alignment Conditions
In order to have defined conditions for the alignment procedure, the TV set should be
warmed up for 10 minutes.
3.1 ADC Calibration
MS1368K-LA is no need to do the ADC calibration..
3.2 White balance
Only the Normal Color Temperature must to be adjusted, the Warm & Cool data will be
changed according to the default offset, but these offset also should been changed according
to the manufacture condition. For more information about Color Temperature, please refer to
the Appendix 2,
The standard data will be confirmed by our PQ engineers, Now these data only is reference.

TCL L49E7800UDS Specifications

General

Brand	TCL
Model	L49E7800UDS
Category	TV
Language	English