9 10
1.2 Getting started
1.2.1 Set up
① With the device facing down, remove the back cover
by using your fingernail to carefully lift the cover
from the device body.
② To insert SIM card or micro SD card, push the SIM
card or micro SD card into the card slot with the
gold-colored contacts facing down.Power off your
phone before inserting or removing the SIM/micro
SD card.
③ Insert the battery by connecting the gold contacts
in the device battery cavity. The battery will only fit
one way.
④ Carefully align the back cover with tabs and press
into place. It only fits one direction.
1
3
2
4
T314D：
1
2
3
4
T314Q:
To Next Page
Loading...
