TCL PIXI 5-10 4G VF - Disassembly and Assembly; ESD Safety; Disassembly Tool

L2E Repair Document TCL Communication Ltd.
Rev.
VF1300 Level 2E Repair Document
Page
1.0
10/39
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
4 Disassembly and assembly
4.1 ESD Safety
Please wear static loop or static glove
4.2 Disassembly tool
You may use the following tools during the disassembly and reassembly procedure:
No
Item
Picture
Required
or not
Remark
1
Plastic flake

2
Tweezers

Anti ESD
3
Pry Bar

4
Screws driver

5
Electric
screws driver

Set the torque
base on the
size of screw