To Next PageTo Next Page
Need help?Do you have a question about the TCL TAC-07CHS and is the answer not in the manual?
General| Cooling Capacity | 7000 BTU |
|---|---|
| Compressor Type | Rotary |
| Power Supply | 220-240V, 50Hz |
| Type | Split Air Conditioner |
| Refrigerant | R410A |
Provides essential information for ordering replacement parts correctly.
Diagram and explanation of the heat pump refrigerating cycle.
Diagram and explanation of the cooling-only refrigerating cycle.
Instructions for measuring temperature differences for performance analysis.
Overview of the remote controller's functions and buttons.
Instructions for setting the remote controller type (Cooling Only/Heat Pump).
Details on compressor delays, frost prevention, and high temperature protection.
Explanation of how the system operates in COOLING mode.
Explanation of HEATING mode operation and cold air prevention.
Covers DRY, FAN, SLEEP, TIMER, and EMERGENCY modes.
Comprehensive list of parts for various indoor unit models.
Comprehensive list of parts for various outdoor unit models.
Classification of air conditioners by function and installation type.
Description of the basic refrigeration cycle and its working principle.
Explanation of refrigerant state transitions using a Mollier diagram.
Chart showing characteristics of moist air and discomfort index.
Methods for calculating and analyzing sound composition and attenuation.
Calculation methods for cooling and heating loads.
Using charts to determine the correct unit size for consumer applications.
Checks for external factors like working power, voltage drop, and wire capacity.
Troubleshooting steps for refrigerant system issues like leaks and charge problems.
General troubleshooting flowcharts for common operational failures.
Installation guide for wall-mounted split type air conditioners.
Temperature-pressure relationships and properties of refrigerants.
List of necessary tools and accessories for installation.
Guidelines for selecting the best location and piping for split type units.
Detailed steps for proper flaring work and pipe connection.
Procedures for checking drainage and forming piping for the unit.
Steps for air purging using a vacuum pump to remove moisture and air.
Procedures for test running the air conditioner and evaluating performance.
