To Next PageTo Next Page
Need help?Do you have a question about the TCL TAC-09CHSC and is the answer not in the manual?
General| Brand | TCL |
|---|---|
| Model | TAC-09CHSC |
| Category | Air Conditioner |
| Language | English |
Key information and warnings for users of the service manual.
Information regarding the maximum permissible height difference between indoor and outdoor units.
Guidelines for calculating additional refrigerant charge based on pipe length.
Specifies the acceptable range of operating voltage for the unit.
Details on the recommended air flow settings for optimal operation.
Lists the key parameters measured for performance analysis.
Describes the low pressure and current characteristics during cooling operation.
Explains the functions and operation of the remote control unit.
Details the operational sequences and settings for Cooling, Dry, and Heating modes.
Describes fan motor control, auto fan speed, and auto vane operation.
Instructions for setting timers and performing emergency operations.
Details on built-in safety features and protection mechanisms.
Explains the functionality and operation of the "I Feel" mode.
Describes the operational parameters and settings for cooling mode.
Lists and explains the different failure codes indicated by the unit.
Provides procedures for diagnosing and resolving unit failures.
Explains the meaning of the indicator lamps on the display board.
Lists parts for indoor units TAC-07CS/K and TAC-09CS/K.
Lists parts for indoor units TAC-07CHS/K and TAC-09CHS/K.
Lists parts for outdoor units TAC-07CS/K and TAC-09CS/K.
Lists parts for outdoor units TAC-07CSC/K and TAC-09CSC/K.
Classifies air conditioners based on function and installation type.
Explains the fundamental principles of a refrigerating cycle.
Details refrigerant state transitions using a Mollier diagram.
Illustrates air characteristics using a psychrometric chart.
Explains how to calculate the cooling and heating load.
Discusses checks related to electrical components and wiring.
Covers troubleshooting procedures for the refrigerant system.
Outlines troubleshooting steps for various operational failures.
Troubleshooting steps when the unit does not operate at all.
General properties and characteristics of R-407c refrigerant.
Compares R-407c refrigerant with R22, highlighting key differences.
Provides installation instructions for wall-mounted split type air conditioners.
Lists the necessary tools for air conditioner installation.
Details the procedure for installing split type air conditioning units.
Covers the process of flaring pipes and connecting them correctly.
Explains how to connect the electrical cables between indoor and outdoor units.
Explains the process of removing air and moisture from the system.
Explains how to perform test runs and evaluate performance.
