TCL TS7000 - Using Your Sound Bar System; Operating Controls and Indicator Lights

30
4 Use your Sound Bar
system
Use your Sound Bar with the top panel
or remote control
1
Make sure the Sound Bar is properly connected to the
power supply and sources.
2
Press on the top panel of your Sound Bar main unit or
remote control to power on the Sound Bar.
3
Press at the top panel of your Sound Bar main unit or
remote control to switch to the correct source.
LED behaviors under dierent source modes
LED indicators Source mode
The red LED is on solidly. in standby mode
The purple LED is on solidly. in HDMI ARC mode
The green LED is on solidly. in AUX mode
The blue LED is on solidly. in Bluetooth mode
TheblueLEDashesslowly. ready to pair
TheblueLEDashesslowly. pairing in progress
The yellow LED is on solidly. in optical mode
The white LED is on solidly. in USB mode