TCL TS7000 User Manual

33
Listen to music from your Bluetooth
device
1
Make sure that your device supports A2DP and/or
AVRCP.Forinformation,checkthespecicationofyour
device.
2
Pair your Bluetooth device with the Sound Bar main
unit (see ‘Connect the Sound Bar with your Bluetooth
device’ on page 27).
3
Start listening to music stored in your Bluetooth device
through the Sound Bar.
• If your Bluetooth device supports A2DP, you can
listen to music, but you cannot control the playback.
• If your Bluetooth device supports AVRCP, you can
listen to music and control music playback with the
remote control. Press
to pause or resume music
playback. Press
/ to skip to the previous/next
track.
Note
• The operational range between the Sound Bar main unit
and your Bluetooth device is approximately 10 meters
(without any obstacle between the Bluetooth device and
Sound Bar main unit).

TCL TS7000 Specifications

General

Audio decoders	Dolby Digital
RMS rated power	160 W
Audio output channels	2.0 channels
Audio Return Channel (ARC)	Yes
Tweeter diameter	38 mm
Soundbar speaker RMS power	80 W
Signal-to-Noise Ratio (SNR)	97 dB
Subwoofer included	No
Display type	LED
Certification	CE
Product color	Black
TV stand usage	-
Audio formats supported	MP3, WAV
Consumer Electronics Control (CEC)	T-link
HDMI version	1.4
Bluetooth version	4.2
USB 2.0 ports quantity	1
Connectivity technology	Wired
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Soundbar power consumption	40 W
Power consumption (standby)	0.5 W
Cables included	AC, IR
Remote control battery type	AAA
Number of remote control batteries	2
Package depth	134 mm
Package width	992 mm
Package height	152 mm
Package weight	3400 g

Weight and Dimensions

Depth	64 mm
Width	920 mm
Height	98 mm
Soundbar weight	2600 g