TCM FB10-7 - 6 MONTHS (1200 OPERATING HOURS) CHECKS

6 MONTHS (1200 OPERATING HOURS) CHECKS
Perform the following checks in addition to preoperational, weekly
(50 operating hours), monthly (200 operating hours) and 3 months
(600 operating hours) checks.
PERIODICAL CHECK
Items to be checked
e Contactors — Checking contact points for wear and
replacement
“ Drive motor — Cleaning
e Drive motor — Lock current adjustment
е Electrical equipment — Insulation
* Battery charger — Operation of voltage relay and voltage
adjustment
e Battery charger electronic timer — Operation and adjustment
е Steering gear case — Oil change
e Hydraulic oil tank — Cleaning suction strainer
e Hydraulic oil — Change
e Hydraulic oil system — Replacement of return filter
е Relief valve — Adjustment of relief pressure
» Mast support — Loose cap bolts
е Accelerator pedal — Stopper adjustment
e Driver's seat - Damage and loose mounting bolts
e Major bolts — Retightening