TCM FB10-7 - Page 118

BRAKE SYSTEM
PERIODICAL CHECK
Checking i ; Before work Monthly | Trimonthly |Semiannualy| Annually
item Service Required Toolremedy | orshift | (50hrs) | (200 hrs.) | (600 hrs.) | (1200 hrs.) | (2400 hrs.)
Check for deformations Visual O
Back plate Check for crakcs Visual O
Check installation for looseness Test hammer
LOAD HANDLING SYSTEM
Checkin 1 1 Before work! Weekly Monthly | Trimonthly |Semiannualy| Annually
item ^ Service Required Toolremedy | Sut | (ore) | (200 hrs) | (600 hrs | (1200 hrs.) | (2400 hrs.)
$$} и
Check for damage, deformation, or wear Visual О О О О О
Forks Check fork stopper pin for damage or wear Visual О O о
Check fork roots and teeth-welded area for А
Cracks or wear visual O О О
Check mast cross members for cracked weld or damage Visual hn ШИШЕ ШЕРІК о O O
Check tilt cylinder bracket and mast for cracks
or damage at welded parts Visual О О О o
Check outer and inner masts for cracked weld л
or damage Visual О О О О
Check carriage for cracked weld or damage Visual О О О О
Mast and
carriage Check roller bearing for looseness Touch o о О О
Check mast support bushing for wear or damage Visual О
Check for mast support bushing bolts for looseness Test hammer © (1st tima only) O O
Check rollers, roller pins and weld for cracks or damage Visual О © © О
Check for looseness of lift cylinder tail bolts, piston
rod head bolts, U bolts, piston head guide bolts Test hammer C) deme ent) о О
Check chain for tension, deformation, damage or
corrosion тошеп О o o o o eus
Chain and
sheave Check chains for lubrication Visual О О О О
Check for elongation Gauge О о о О