TCM FB10-7 - REGENERATIVE BRAKING

REGENERATIVE BRAKING
as "i
12345678
12345678
Regenerative braking means the use of the drive motor as a
temporary generator to charge the battery with the generated
electric current.
Regenerative braking is available in two ways, brake regeneration
and switch-back regeneration. Each regeneration is available in
the following procedures and the 8-segment indicator appears as
above.
INSTRUMENTS AND CONTROLS
и Brake regeneration
1) The direction of travel is the same as the F/R lever position.
(example: When the direction of travel is “forward,” the F/R lever
is in the “forward” position.)
2) The accelerator pedal is released or the brake pedal is stepped
on.
3) If the brake pedal is released and accelerator pedal is stepped
on or if the traveling speed drops to 0 km/h during regeneration
braking, the function will be cancelled.
E Switch-back regeneration
1) The direction of travel is the same as the F/R lever position.
(example: When the direction of travel is “forward,” the F/R lever
is in the “forward” position.)
2) The F/R lever is reversed with the accelerator pedal stepped
on.
3) If the F/R lever is reversed or the traveling speed drops to 0 km/
h during switch-back regeneration, the function is cancelled.