17
Input
Tap Personal / Input. You can change settings related to input
method, word completion, voice recording and other options.
Today
Tap Personal / Today. This screen allows you to customize the
Today screen.
Backlight for display and keypad
Tap System / Backlight. Change the settings as follows:
Display backlight: The default is on. Tap Battery Power,
External Power and Brightness tabs to change settings.
Keypad backlight: The default is off. Scroll by tapping the
arrows over to Keypad Battery, Keypad External and
Keypad Brightness tabs to change settings.
Encryption
Tap System / Encryption. To prevent sensitive data on a CF or
SD storage card from being used if the card is lost or stolen, files
can be encrypted as they are placed on the card. However, they
will only be readable on the unit on which they were initially
encrypted. It will not be possible to read these files on the storage
card with any other device or even from a PC. Files saved on
storage cards before enabling encryption will not be encrypted.
NOTE: if you perform a Clean Boot on your unit, previously
encrypted files on storage cards will no longer be readable by that
unit or by any other device, including PCs.
Power
Tap System / Power to view the approximate battery power
remaining.
Tap the Advanced tab and choose the settings for
automatically turning off the unit when not in use.
Tap System / Power / Calibration to see if the message reads
Calibration recommended or Calibration not necessary. For more
information on calibration, refer to page 10.
To Next Page
Loading...