11
EN
A
Analog audio input connectors
(LINE 1), (LINE 2), (LINE 3), (XLR)
Use these to input stereo analog audio.
Connect cassette decks, CD players and other analog
audio output devices to these connectors.
Use a commercially available audio cable to connect
these devices.
LINE 1: RCA audio cable
LINE 2: RCA audio cable
LINE 3: RCA audio cable
XLR: Balanced XLR cable
Connect this unit's R jack with the R jack of the audio
output device. Likewise, connect its L jack to the other
in device's L jack.
o
This unit’s XLR connectors are 2: HOT.
B
AUTO POWER SAVE switch
Use to turn the automatic power saving function ON
and OFF.
When ON, the unit will automatically enter standby
mode if there is no audio input for about 30 minutes.
o
When in standby mode, turn this unit's INPUT
SELECTOR or press a button on the remote control
to turn the unit ON.
C
Power inlet (~IN)
Insert the included power cord here. After complet-
ing all other connections, insert the power plug into a
power outlet.
Unplug the cord from the outlet when not using the
unit for a long time.
V Use only the included power cord. Use of a differ-
ent cord could cause fire or electric shock.
V
Do not turn the unit on until after mak-
ing all connections.
o
Carefully read the manuals of the devices that
you are connecting and follow their instructions
when making connections.
o
Do not bundle connecting cables with power
cords. Doing so could cause noise.
o
Connect all plugs completely.
To Next Page
Loading...
Need help?
General
