EasyManua.ls Logo

Teac A-H500 - User Manual

Teac A-H500
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
a-h500
`
INTEGRATED STEREO AMPLIFIER
9A06054500
This appliance has a serial number located
on the rear panel. Please record the model
number and serial number and retain them
for your records.
Model number
Serial number
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert
the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Ü
ÿ
Ÿ
Thanks for buying a TEAC. Read this manual carefully to get the
best performance from this unit.
Nous vous remercions pour l’achat d’un appareil TEAC.
Lire ce manuel avec attention pour obtenir les meilleures
performances possibles de cet appareil.
Vielen Dank für den Kauf dieses TEAC-Geräts.
Bitte lesen Sie diese Anleitung sorgfältig durch, um die Leistungs-
fähigkeit dieses Geräts optimal nutzen zu können.
Grazie per aver acquistato un prodotto TEAC.
Leggere attentamente questo manuale per ottenere le migliori
prestazioni da questo apparecchio.
Enhorabuena por la adquisición de un TEAC.
Lea detenidamente este manual a fin de obtener el mejor
rendimiento de esta unidad.
OWNERS MANUAL .................... 3
MANUEL DU PROPRIETAIRE ...... 11
BEDIENUNGSANLEITUNG........... 19
MANUALE DI ISTRUZIONI .......... 27
MANUAL DEL USUARIO ............. 35
ENGLISHFRANÇAISDEUTSCH
ITALIANO
ESPAÑOL

Questions and Answers

  • L
    lindseybarreraAug 14, 2025
    What to do if the Teac Amplifier sound stops and the power light is blinking?
    • W
      websterclaytonAug 15, 2025
      If the sound stops during playing, or there's no sound after turning on the power, and the power standby indicator is blinking, it indicates that the protection circuitry has been activated. This is likely due to short-circuited speaker wires or an overloaded output. To resolve this, immediately turn off the power and inspect the speaker connection wires to eliminate any shorts. Also, ensure you're using speaker systems with the correct impedance rating or reduce the volume level.
  • R
    Robert JohnsonAug 18, 2025
    Why is there no sound coming from my Teac Amplifier?
    • Y
      yfrankAug 18, 2025
      If you're not getting any sound from your Teac Amplifier, first, ensure that the volume control is properly adjusted. Then, verify that the input selector is set to the correct source you want to listen to. Finally, check all connections to the speaker systems to make sure they are complete and correct.
  • E
    Earl CowanAug 21, 2025
    How to fix Teac A-H500 Amplifier when sound is not heard from one speaker?
    • A
      alexander55Aug 21, 2025
      If you're not hearing sound from one of the speakers connected to your Teac Amplifier, start by checking the speaker wire connections to ensure they are properly connected. Additionally, verify that the balance control is centered so that sound is equally distributed between both speaker systems.
  • C
    Carol MillerAug 25, 2025
    Why is bass or stereo sound not reproduced fully on my Teac A-H500 Amplifier?
    • M
      Maria SimmonsAug 26, 2025
      If the bass or stereo sound is not fully reproduced by your Teac Amplifier, the speaker system connections may not be correct. Check the polarity of the connections to ensure they are properly connected.
  • T
    tiffany02Aug 28, 2025
    How to stop a Teac A-H500 from humming?
    • B
      Brianna JonesAug 28, 2025
      If you experience a low-pitched noise (hum or buzz) from your Teac Amplifier, it might be due to the power cord or a fluorescent light being too close to the connection wires. Try to increase the distance between the unit and any nearby electrical appliances.
  • T
    Tracy WashingtonAug 31, 2025
    What to do if left and right sounds are reversed on my Teac A-H500?
    • B
      Brett GonzalezAug 31, 2025
      If, when listening to stereo sound on your Teac Amplifier, the left and right sounds are reversed, the left and right speaker connections or source connections are likely reversed. Inspect all connections and correct them as needed.
  • J
    John GarciaSep 4, 2025
    Why aren't bass, treble, and balance controls working on my Teac A-H500 Amplifier?
    • A
      Andrew RiveraSep 4, 2025
      If the bass, treble, and balance controls on your Teac Amplifier are not effective, the CD direct function might be engaged. Disengage the CD direct function by pressing the CD direct button again to resume tone and balance controls.
  • P
    polsenSep 7, 2025
    How to turn on Teac A-H500?
    • A
      Angela JacksonSep 7, 2025
      If your Teac Amplifier is not powering on, make sure that the main power switch on the rear panel is in the ON position.
  • S
    Samuel DouglasSep 12, 2025
    Why is my Teac Amplifier not recording?
    • J
      Joshua WilliamsSep 12, 2025
      If the Teac Amplifier is not recording, make sure the rec selector is set to the proper position. Also, check if the CD direct function is engaged; if so, press the CD direct button to disengage it.

Summary

Important Safety Instructions

Before Use

Read This Before Operating

Instructions to read before operating the amplifier for optimal performance and safety.

Connection

Speaker Placement

Guidelines for optimal speaker positioning to enhance playback characteristics and ventilation.

Preventing Speaker Damage

Tips to avoid damaging speakers, including volume, connection, and diaphragm handling.

Rear Panel Overview

Audio Signal Jacks

Connections for MD/TAPE 2, TAPE 1, CD, TUNER, and AUX input sources.

Speaker Connection Guide

Detailed instructions on how to connect speakers, including impedance and wire preparation.

Front Panel Controls and Their Functions

Power Standby;On Button

Button to turn the system on or put it into standby mode.

Input Selector

Knob to select the desired audio input source.

CD Direct Button

Engages CD Direct mode for pure sound, bypassing tone controls.

Basic Operation

Setting Volume and Power

Initial steps for setting volume to minimum and turning the system on.

Selecting Source and Playback

Steps to select audio source and operate the playback unit.

Recording

Dubbing Between Decks

Instructions for dubbing audio from tape 1 to MD/tape 2 or vice versa.

Remote Control Operation

Button Functions

Explanation of various buttons on the remote control unit.

Loading Batteries

Instructions on how to load batteries into the remote control unit.

AI Direct Play Function

Specifications

Troubleshooting

No Power or Sound Issues

Guidance for resolving problems related to no power or no sound output.

Audio Playback Problems

Solutions for issues like sound stopping, reversed channels, or hum.

Recording and Speaker Issues

Troubleshooting for recording failures and sound from only one speaker.

Regulatory Information

FCC Compliance (USA)

Information regarding FCC rules for Class B digital devices and interference.

Canadian Compliance

Statement on digital apparatus radio noise emissions meeting Canadian regulations.

AC Power Cord Connection Safety

Safety caution for connecting the AC power cord to prevent electric shock.

Teac A-H500 Specifications

General IconGeneral
Frequency Response5Hz to 80kHz
Total Harmonic Distortion0.05%
Signal-to-Noise Ratio100dB (line)
Speaker Load Impedance4Ω to 16Ω
Output50W + 50W (8 ohms, 20Hz-20kHz)

Related product manuals