Teac CD-P1120 - Connections; Signal cords; Power cord; Headphones

– 5 –
Before making connections, be sure to read
the instruction manual of the stereo amplifi-
er carefully and turn the power of the
stereo amplifier and the player OFF.
Caution:
If the CD player interferes with the tuner, TV
reciever, etc., allow a reasonable distance
between them.
∑ Power cord
Be sure to connect the power cord to an AC
outlet which supplies the correct voltage.
∑ Headphones
When using headphones, connect the
headphone plug into the PHONES jack.
O Adjust the level of the signals output
from the phones jack.
Connections
RCA pin cord



To AC Outlet
Stereo amplifier
CD-P1120
L
R
ENGLISH
∑ Signal cords
Connect the LINE OUT terminals to the CD
terminals, etc. of the stereo amplifier using
RCA pin plug cords.