Do you have a question about the Teac CD-P1120 and is the answer not in the manual?
Type | CD Player |
---|---|
Playback Formats | CD, CD-R, CD-RW |
Channels | 2 |
Frequency Response | 20 Hz - 20 kHz |
Total Harmonic Distortion | 0.003% |
Output Voltage | 2.0 V |
Digital Output | Coaxial |
Power Consumption | 12W |
Dimensions | 435 x 100 x 290 mm |
Output | RCA |
Read instructions and warnings before operating the unit.
Instructions for preventing condensation issues and ensuring proper playback.
Connect player's line out to stereo amplifier's CD/AUX terminals.
Connect the power cord to an AC outlet of correct voltage.
Connect headphones to the PHONES jack and adjust level.
Instructions for powering on, loading discs, and starting playback.
How to enable and use the shuffle playback function for random track selection.
How to play the beginning of each track for 10 seconds.
How to set the player to repeat a single selected track.
How to set the player to repeat the entire CD.
How to set a specific section for repeat playback.
How to locate tunes using the MUSIC SKIP buttons.
How to advance to the next or previous track.
How to search for specific parts of a track using SEARCH buttons.
Information on operating the unit using the remote control.
Instructions for inserting batteries into the remote control.
When to replace batteries in the remote control.
Important safety and usage guidelines for batteries.