Need help?Do you have a question about the Teac CD-P1100 and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Output | RCA |
| Dimensions | 435 x 100 x 290mm |
| Disc formats | CD, CD-R, CD-RW |
| Dynamic range | 100 dB |
| Line output | 2.0 V |
| Digital outputs | Coaxial, Optical |
| Output Voltage | 2.0 V |
| Digital Output | Coaxial, Optical |
| Power Consumption | 12W |
| Frequency Response | 20Hz to 20kHz |
Instructions for changing voltage settings on export models, requiring AC cord removal.
Warning against using controls or adjustments other than specified to avoid radiation exposure.
Procedures for servo adjustments including VCO free run frequency, focus bias, E-F balance, and error gain.
Tests covering output voltage, frequency response, and total harmonic distortion of the audio signal.
List of parts for the control board assembly.
List of parts for the main board assembly.
List of parts for the power board assembly.
List of parts for the LCD unit.
List of parts for the sensor board assembly.
To Next Page
