Teac CD-P1100 - 2 ADJUSTMENT AND CHECKS; 2-1 SERVO ADJUSTMENT

| CD-P1100
2 ADJUSTMENT AND CHECKS
2-1 SERVO ADJUSTMENT
Reference Disc for adjustments : Sony YEDS-18
Adjustments and Test Points
MAIN PCB
Testing Equipment Procedure
* 5020 Frequency Response Analyzer (A) VCO Free Run Frequency Adjustment
(NF Electronic instrument)
* Frequency Counter (Goldstar) 1. Turn power on without loading a disc.
* PM3365A Digital Storage Oscilloscope (Philips) 2. Connect frequency counter probe to TP. CLK ani TP.
GND.
3. Short TP. ASY to TP. G1.
4. Adjust VR201 so that the frequency counter sads
4.32 + 0.02MHz. (adjust in STOP mode)
5. Disconnect TP. ASY to TP. G1.