Need help?Do you have a question about the Teac CG-10M and is the answer not in the manual?
General| Control type | Buttons |
|---|---|
| Housing color | Black |
| Frequency range | - Hz |
| Output impedance | 50 Ω |
| Input frequency | 10000 Hz |
| Power cord included | Yes |
Weight and Dimensions| Depth | 248.7 mm |
|---|---|
| Width | 290 mm |
| Height | 84.5 mm |
| Weight | 3600 g |
| Package depth | 345 mm |
| Package width | 444 mm |
| Package height | 193 mm |
| Package weight | 4600 g |
Critical safety warnings for preventing fire and electric shock.
General cautions for safe operation and maintenance.
Guidelines for proper installation to ensure ventilation and prevent overheating.
Details about the unit's vibration-dispersing feet and included pads.
Explains the 10MHz clock signal output for digital devices.
Details on connecting the power cord to the unit's power inlet.
Describes the function of the power switch.
Explains the operation status meter and its indication.
How to adjust the display brightness of the meter.
Technical explanation of the Oven Controlled Crystal Oscillator.
Instructions for turning the unit on and initiating operation with connected devices.
Initial checks for power, sound output, and humming noise.
Guidance on resolving clock synchronization problems with connected devices.
Technical details regarding the clock signal output parameters.
Specifications for the Oven Controlled Crystal Oscillator.
Covers general specs, power, dimensions, and included accessories.
Guidelines for installing the unit to ensure proper airflow and prevent overheating.
Information on the unit's vibration-dispersing feet and protective pads.
Instructions for connecting the 10MHz clock output to digital devices.
How to connect the unit to the power supply.
Describes the function of the power switch.
Explains the meter's indication of the oven's operational status.
How to adjust the display brightness of the meter.
Technical details about the Oven Controlled Crystal Oscillator.
Steps to turn the unit on and start its basic functions.
Initial troubleshooting steps for common problems.
Steps to resolve issues where the unit fails to power on.
How to fix problems with no audio output.
Guidance on reducing unwanted humming noises.
Troubleshooting clock synchronization issues.
Technical details regarding the clock signal output parameters.
Specifications for the Oven Controlled Crystal Oscillator.
General specifications covering power, dimensions, and operating conditions.
List of accessories provided with the unit.
To Next Page