Teac CS-X8 - Timer and Sleep Timer Settings; Setting the Auto Timer Function

21
Setting the Timer 1
Adjust the clock before setting the timer.
If the power switch of the subwoofer turned off, the
settings kept in memory (clock, preset stations, timer
setting) will be erased.
Press and hold the TIMER button until “TIMER” and
“ON” indicators appear on the display.
1
The “hour” value starts flashing.
< When no button is pressed for 10 seconds, the timer setting
mode will be cancelled.
The “minutes” value starts flashing.
Press the Up or Down button to set the start time
(minute), and then press the TIMER button.
3
“TIMER” and “OFF” indiactors appear on the display and the
“hour” value starts flashing.
Press the Up or Down button to set the start time
(hour), and then press the TIMER button.
2
Press the Up or Down button to set the stop time
(minute), and then press the TIMER button.
5
The “minutes” value starts flashing.
Press the Up or Down button to set the stop time
(hour), and then press the TIMER button.
4