14
Watching TV
Switching to DTV
If you are not in DTV Mode, switch to DTV by pressing the TV button on the remote control.
Alternatively, press the SOURCE button and select DTV, then press the OK button.
If you are in USB Mode, press the EXIT button to return to DTV Mode.
NOTE: ATV = Analogue TV. Analogue TV broadcasts may be available in some, but not all regions.
Choose ATV if you need to watch analogue TV channels.
Changing and Choosing Channels
To show a list of all available TV channels, press the CH LIST button. Use the ▲ / ▼
buttons to navigate the list and press OK to choose a channel.
To change channels according to their sequence in the channel list, press the CH+ or CH-
buttons to move to the next or previous channel.
If you have set some channels as “Favourites”, press the FAV button to show your shortlist
of Favourite channels. Use the ▲ / ▼ buttons to navigate the list and press OK to view.
(See “Program Edit” in the Menu Systems chapter for Favourites set up instructions.)
Program Info
Press the INFO button to display detailed program information on the screen. Press EXIT to
hide it again, or wait a few seconds for it to auto-hide.
Electronic Program Guide (EPG)
The EPG provides a detailed program schedule up to 7 days ahead for every digital TV
channel, provided by the broadcaster.
Press the GUIDE button to display the EPG. Use the ▲ / ▼/ / buttons to navigate. The
schedule loads only after you have tuned into the corresponding frequency. If the schedule
looks empty for a particular channel after you scroll through the EPG’s channel list, press the
OK button to tune into the channel and the schedule should load at once.
To see more information on a program on the list, highlight it and press INFO. If the
description runs into multiple pages, use the ▲ / ▼ buttons to navigate the pages.
To skip forward 24 hours on the schedule display, press the GREEN button.
To skip backward 24 hours on the schedule display, press the YELLOW button.
To Next Page
