6
Specifications
L & R Speakers
Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mm (tweeter)
80 mm (woofer)
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ohms
Power Handling Capacity . . . . . . . . . . . . . . . . . . . . . . . . 50 W
Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 dB
Frequency Response . . . . . . . . . . . . . . . . . . . 120 Hz - 20 kHz
Dimensions (W x H x D) . . . . . . . . . . . . . 120 x 216 x 149 mm
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8 kg each
Subwoofer
Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mm
Output Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 W
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ohms
Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 dB
Frequency Response . . . . . . . . . . . . . . . . . . . 45 Hz to 180 Hz
Power requirements . . . . . . . . . . . . . . . . . . . 230 V AC, 50 Hz
Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . 100 W
Dimensions (W x H x D) . . . . . . . . . . . . . 270 x 270 x 249 mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.5 kg
Standard Accessories
Speaker Cable (1.8 m) x 2
RCA pin cord
< Design and specifications are subject to change without
notice.
< Illustrations may differ slightly from production models.
A
B
C
Subwoofer
Functions
VOLUME
Turn this knob to adjust the volume of the subwoofer.
Take care of the total balance between the volume of
subwoofer and front speakers.
PHASE
Use this switch to select the phase of the subwoofer.
Select either 0 or 180 to achieve the most seamless
integration of energy with front speakers.
POWER
Use this switch to turn the subwoofer on or off.
This switch lights when the subwoofer is on.
C
B
A
To Next Page
Loading...
