Teac MC-DX40DAB - Preset Select

21
DRC value
This option sets the Dynamic Range Control (DRC) value to be
applied to received broadcasts. DRC is used to reduce the range
between high and low volumes of audio and is sometimes
applied at the broadcast source. Pop music may have a high
value of DRC applied, appropriate for constantly high listening
levels, while classical music broadcasts may have no DRC applied
to allow the listener to hear the full dynamic range of the source
volume.
There are three values of DRC you can apply.
0 : None
1/2 : Medium
1 : Maximum
1
While listening to a DAB broadcast press the DISPLAY
button.
2
Select “DRC value” using the skip button (. or /).
3
Press the SELECT button.
4
Select the desired level of DRC in the second line of the
display using the skip button (. or /).
5
Press the SELECT button.
Preset select
Use this option to select the DAB preset station.
1
While listening to a DAB broadcast press the DISPLAY
button.
2
Select “Preset select” using the skip button (. or /).
3
Press the SELECT button.
currently tuned station.
preset No.
4
Select the desired preset station in the second line of the
display using the skip button (. or /).
5
Press the SELECT button.