EasyManua.ls Logo

Teac PCD260 - Auxiliary Input (Aux. In); Maintenance; Specifications

Teac PCD260
5 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
In the event of a product failure within the warranty period, please call the
TEAC Warranty Service Hotline
1300 553 315
Between Monday to Friday - 8.30AM to 5PM AEST
*Please have your purchase receipt and the product’s serial number ready
For other enquiries and support please visit
www.teac.com.au
SPECIFICATIONS
POWER SUPPLY:
POWER CONSUMPTION:
OUTPUT POWER:
GROSS WEIGHT:
NET WEIGHT:
DIMENSIONS:
RADIO
FREQUENCY RANGE
FM:
AM:
AC: 240V 50Hz
DC: 9V (UM-2 1.5V x 6)
14 W
2 x 1 Watt RMS
1.9kg
1.5kg
26 x 12 x 16.5cm
87.5 - 108 MHz
522 - 1620 kHz
MAINTENANCE
CLEANING
WARNING: Disconnect the unit from the mains supply before cleaning.
- Use a soft, dry, clean cloth. Regularly dust the vents at the back or sides.
- Using solvents, abrasive or alcohol-based products risks damaging the appliance.
- If an object or liquid enters inside the appliance, unplug it immediately and have it checked
by an authorized engineer.
Notes on discs
* Do not use irregular shape CDs (example: heart-shaped, octagonal ones). It may result in
malfunctions.
* Do not place more than one disc in the disc compartment.
* Do not try to open the disc compartment during playback.
* Do not touch the lens. Doing so may cause malfunction.
* If there is a scratch, dirt or fingerprints on the disc, it may cause playback error. Before
playing, clean the disc with a cleaning cloth. Wipe the disc from the center out. Don't store
discs in places with high temperatures or high humidity, they can become warped. After
playing, store the disc in its case.
Important Note
• Before transporting the unit, remove the disc from the disc compartment.
AUXILIARY INPUT (AUX. IN)
1. Plug one end of cable (not included) into the LINE IN jack of the unit.
AUX IN
2. Plug the other end of the cable into the Headphone or Line Out jack of the external source.
3. Press the button to select Auxiliary mode. The auxiliary icon “AUX” is displayed.
Operate your external auxiliary source as usual.
4. Adjust the volume to desired level.
5. To stop playback, disconnect your auxiliary source from the LINE IN jack.
- 7 - - 8 -
RD-3353NA IB TEAC 001 REV0.indd 5 2017/10/27 16:29:01

Related product manuals