Teac SB21204WD - Connecting the Soundbar and Subwoofer; Using the Bluetooth Function

CONNECTING THE SOUNDBAR AND SUBWOOFER
USING THE BLUETOOTH FUNCTION
Pairing a Bluetooth Device for the First Time
1. Press the POWER buon on the unit or the POWER buon on the remote control to switch on
the unit.
2. Select and press the MODE buon repeatedly on the remote control unl in Bluetooth mode
or press the Mode buon repeatedly on the sound bar to enter Bluetooth mode.
3. Using the nave controls on your Bluetooth device, select the “SB21204WD” in your Bluetooth
sengs to pair.
4. When successfully paired and connected, a beep will issue from the unit. Aer inial pairing,
the unit will stay paired unless unpaired manually by the user.
5. If your device becomes unpaired or is unable to connect, repeat the above steps.
1. Connect the subwoofer cable to the soundbar.
2. Please ensure that your soundbar is being mains powered and switched ‘ON’ for inial set up.
To do this, press the Power buon on the unit or the POWER buon on the remote control .
3. If you are having connecvity issues, try moving the subwoofer closer to the soundbar.