14
reproduced during this operation.
AS (AUTO STORE)/ PS (PRESET SCAN)
AS (Auto Store): In tuner mode, Press the AS/PS on the panel or RPT/P.SCN
button on the remote and hold for 2 seconds to store radio station's with the best
reception to the preset buttons automatically.
PS (Preset Scan): In tuner mode, press this button to scan the preset memorized
station, each preset scan for 5 seconds. Press again to stop operation.
BAND
Press the BAND button to select your frequency band of choice in the following
sequence:
FM 1
→
FM 2
→
FM 3
→
WM1
→
MW2
→
FM 1 When a new frequency band is selected,
the last chosen frequency / station of that frequency band will be heard.
MEM/ PLAY/ PAUSE
In Radio mode, see Program Preset Stations. In Multimedia mode ( DVD, USB, SD),
press it to start or pause the playback. Press and hold the button for 2 seconds to stop
the playback.
MODE
Press the MODE button to toggle between the available audio sources in the following
sequence: Radio
→
DISC
→
USB
→
CARD
→
AV IN
→
Radio. Selections only available if
media is inserted.
DSP
Press the DSP button to choose sound effect in the sequence of
FLAT→CLASSICS→POP→ROCK→DSP OFF
MENU
Press the MENU button to enter into the settings mode. Press the MENU to return to
settings list. In Radio mode, the MENU will display:
1）AUDIO => 2） DUAL=> 3）RDS SETUP=> 4）EXPERT=> 5）CLOCK.
In AV IN/DVD/SD/USB mode, the MENU will display.
1）AUDIO => 2）PICTURE=> 3）DUAL=> 4）RDS SETUP=> 5）EXPERT=> 6）
CLOCK
1）Audio Menu
BASS Support 10 levels. Default level is 0.
TREBLE Support 10 levels. Default level is 0.
BALANCE
Support 10 levels for each left and right channel. Default is left equal
to right.
To Next Page
Loading...
