www.teamorion.com 7
4. After you have made the modications, make sure you
save the changes by pressing the “save” key.
Note: available parameters vary depending on the ESC type.
Refer to the ESC user manual.
RESTORE FACTORY DEFAULT SETTINGS
You can restore the factory default settings for the current
prole by pressing the “save” key while “Restore Default” is
displayed on the screen.
CHECK BATTERY CHARGE STATUS
The program box can check the charge status of your
batteries. To use this function, connect your LiPo/LiFe
battery to the program box using the balancing connector
of the battery. The display shows the total battery voltage,
charge percentage and also a graphical representation of
the battery charge status.
Note: make sure to respect the polarity as indicated on the
program box
COMPUTER SOFTWARE
The computer software allows you to update the program
box and ESC rmware (which are two separate rmware)
and modify the ESC parameters (as with the program box).
You can nd the latest version of the computer software on
our www.teamorion.com/R10-downloads.html website. All
of the available ESC and program box rmware are included
To Next Page
Loading...
Need help?
General