www.teamorion.com 9
4. Connect the ESC to program box and power it on.
5. In the software, in the device tab, select ESC speed
controller
6. Click on the rmware upgrade button and then on the
upgrade version drop down menu to select the new
software version.
7. Click the upgrade button to ash the new rmware.
Use the computer software to modify the ESC
parameters:
1. Download the software from our website and install it.
2. Launch the software.
3. Connect the program box to the computer using the
supplied USB cable.
4. Connect the ESC to program box and power it on.
5. In the software, in the device tab, select ESC speed
controller
6. Click on the basic/advance buttons and then on the drop
down menus to modify the settings.
7. Click the apply button to save the changes to the ESC
memory.
To Next Page
Loading...
Need help?
General