Teble TB-IH001 - Wall Mounting the Camera; Functions and Operations

Don’t release the camera until you’re sure it is firmly mounted.
5. Wall Mounting Camera
1) Unscrew bracket's nut and adjust the bracket to an appropriate angle.
Screw the nut again tightly.
2) Drill holes on the wall and put green ribbed plastic anchors into holes with a
hammer.
3) Fix the bracket on the wall by screwing its screws into the ribbed plastic
anchors.
4) Screw up the top bolt of bracket with the nut at the bottom of the camera.
5) To better match the proper viewing field, Please unscrew the nut on the
side of the bracket, adjust the angle of the bracket downwards, until the
baby appears in the monitoring range, tighten the nut on the side of the
bracket again, and the installation is complete.
12:08:06
°C / °F
Live video loop
Camera
Current Time
Lullabies enabled
Sleep Mode enabled
Sound detection enabled
Temperature alarm enabled
Feeding reminder enabled
VOX mode is on
Night mode
2 times magnification
4 times magnification
Current room temperature
Battery Level
FUNCTIONS & OPERATIONS
Top Status Indications
No signal connection
Signal strength
Notifications Icons
No camera connected
Sound Alarm
Temperature Alarm
Feeding Notification
1 2
3 4
5
09 10