Recording Operation
Press REC button on the remote control to start recording in DTV mode. Press a message window
appears.
Note:
a. Please make sure the USB device is on the TV.
b. Please mke sure the speed and free space of the USB is enough.
c. Press Recording list button to display the Recorder list, and you can play the program you selected.
d. You can also play the Recorded program in Multimedia mode.
Recording
Select “OK” item, and press OK to exit recording
Press button on the remote control to start timeshift in DTV mode.
Note:
a. Please make sure the USB device is on the TV.
b. Please make sure the speed and free space of the USB is enough.
c. Press button to pause the program you are watching, and the timeshift will start.
d. Timeshift time menu on the corner shows the time between the current picture and the
living broadcasting picture;
e. During the recoding progress, if the signal is missing, the recording process will take a pause until the
signal is stable again.
Timeshift
Press to stop timeshift.
26
To Next Page
Loading...
General