EasyManua.ls Logo

TECC arc4 - Display Modes and Atomizer Protection

TECC arc4
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Display Modes:
When powered off, hold both adjustment
buttons to turn the display orientation
upside down.
Short Circuit & No Atomizer Protection:
If a short circuit occurs, ‘Atomizer Short’ will
be displayed on the screen and the device
will not fire. If no atomizer is detected, ‘No
Atomizer’ will be displayed on the screen.
Replace the atomizer head to continue.
Atomizer Protection:
If the power button is pressed for
longer than 10 seconds, the output will
automatically cease and the message
‘Over 10s’ will be displayed.
Using your arc 4
TECC_Arc4_Compliant_Manual(2).indd 10 03/11/2016 13:58