EasyManua.ls Logo

TECC arc4 - Filling the TECC arc 4 Tank

TECC arc4
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Filling the Tank:
Remove the CS Air 2 Tank from the arc 4
battery by unscrewing at the atomizer base.
Invert the tank, unscrew and remove the
atomizer base. Refill the tank through one
of the apertures either side of the central
air tube. Do not place liquid in the central
tube. Refit the atomizer base and screw the
assembled tank back onto the arc battery.
Maximum refill nozzle diameter: 2.8mm
Using your arc 4
TECC_Arc4_Compliant_Manual(2).indd 5 03/11/2016 13:58