TECE RD 20203 - Page 17

17
DAN
NOR
FIN
SWE
ENG
POL
RUS
ENG
Device overview
Description Steps
External floor sensor
Setting the minimum floor
temperature.
¾ Confirm the selection
by pressing.
¾ Make the setting.
¾ Confirm the entry.
9 The display flashes in the
Settings menu.
This function is displayed if the
connection of an external floor
sensor is defined in the Service
menu under Parameter 040.
Holiday temperature
Setting the target temper-
ature for the holiday func-
tion in the Lifestyle functions
menu.
¾ Confirm the selection
by pressing.
¾ Set the target temper-
ature.
¾ Confirm the entry.
9 This is displayed in the Set-
tings menu.
Target temperature
limitation
Setting of the maximum and
minimum settable target tem-
perature.
¾ Confirm the selection
by pressing.
¾ Set the minimum
temperature.
¾ Confirm the entry.
¾ Set the maximum
temperature.
¾ Confirm the entry.
9 This is displayed in the Set-
tings menu.
Time indications
Setting of time and weekday.
¾ Confirm the selection
by pressing.
¾ Set the time (hh:mm)
and the weekday by
rotating and apply by
pressing.
9 This is displayed in the Set-
tings menu.