EasyManuals Logo

Tech 21 SansAmp PSA 1.1 User Manual

Tech 21 SansAmp PSA 1.1
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
1
TABLE OF CONTENTS
Safety Instructions, Warnings, Fuse Information 2-3
Quick Start Instructions 3
Tech 21, The Company 4
SansAmp PSA-1.1 Overview 4
Front Panel 5-7
Input Jack 5
Pre-Amp 5
Character Controls 6
Low and High 7
Level 7
Trim 7
3-Digit LED display 7
Save Switch 7
Up and Down Buttons 7
Programming 8-9
Saving a Program 8
Moving/Copying a Program 9
Locating Individual Control Values 9
Rear Panel 10-12
Input 2 Section 10
Input 2 Jack 10
Level Selector Switch 10
0dB and -10dB Positions 10
Effects Loop 10
Effects Send 10
Mix 50/50 Switch 10
Right & Left Returns 11
Universal Output Section 11
1/4" Output Jacks and Output Level Switch 11
XLR Output Jacks and Output Level Switch 11
XLR Ground Lift 12
MIDI In and MIDI Thru/Out 12
Headphone 12
Suggested Setups 13-15
Using the SansAmp PSA’s Inputs 13
Using the SansAmp PSA’s Outputs 14
Using the Effects Loop 14
Using MIDI 15
Special Page Functions & MIDI Implementation 16-21
Function 1: Custom Preset Data Dump 17
Function 2: Define MIDI Mapping 17
Function 3: 0-127 / 1-128 Patch Offset 18
Function 4: Preset Protection Writer 19
Function 5: MIDI Channel Select 19
Function 6: Software Revision Number 20
Function 7: Edit Pot Display Mode 20
Function 8: Disengage All Pots 21
Function 9: MIDI Thru Disable 21
Factory Presets and Custom Settings Chart 22-23
Custom Settings Diagrams 24-27
Special Page Restore and Factory Preset Reset 28
Options 28
Specifications 29
Warranty Information Back Cover

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tech 21 SansAmp PSA 1.1 and is the answer not in the manual?

Tech 21 SansAmp PSA 1.1 Specifications

Power Engine 300 and Power Engine 400

Power IconPower
power rating Power Engine 300300-watt/4-Ohm mono
power rating Power Engine 400400-watt/8-Ohm stereo
Weight and Dimensions IconWeight and Dimensions
dimensions17”w x 3.5”h x 10”d
overall dimensions19”w x 3.8125”h x 11.5”d
weight Power Engine 30022.3 lbs
weight Power Engine 40026.25 lbs

Power Engine 60

Power IconPower
power rating60 watts
impedance8 Ohms
handling100 watts
Weight and Dimensions IconWeight and Dimensions
dimensions18.25”w x 18.75”h x 14.25”d
weight36 lbs

SansAmp PSA-1.1

Power IconPower
maximum power consumption5 Watts
AC input power100V, 117V, 230V, 240V
cycles50/60 Hz
Input and Output IconInput and Output
input impedance Input 11MegOhm
input impedance Input 24.7MegOhm
output impedance 1/4”1K Ohm min
output impedance XLRs600 Ohm min
Weight and Dimensions IconWeight and Dimensions
dimensions19.0”w x 1.75”h x 5”d
overall depth6”
weight5 lbs

Related product manuals