POWER REQUIREMENTS
*Utilizes standard 9V alkaline battery (not included).To install, simply remove
back plate. (NOTE: The Input activates battery.To conserve energy, unplug
when not in use.) Power Consumption: approx. 5mA.
*USE DC POWER SUPPLY ONLY! Failure to do so may damage the unit
and void warranty. DC Power Supply Specifications:
-9V DC regulated or unregulated, 100mA minimum;
-2.1mm female plug, center negative (-).
Optional factory power supply is available:Tech 21 Model
#
DC2.
WARNINGS:
* Attempting to repair unit is not recommended and may void warranty.
* Missing or altered serial numbers automatically void warranty. For your own
protection, be sure serial number labels on the unit’s back plate and exterior
box are intact.
ONE YEAR LIMITED WARRANTY. PROOF OF PURCHASE
REQUIRED.
Manufacturer warrants unit to be free from defects in materials
and workmanship for one (1) year from date of purchase.This warranty does not
include damage resulting from accident, misuse, abuse, alteration, or incorrect cur-
rent or voltage. If unit becomes defective within warranty period,Tech 21 will
elect to repair or replace it free of charge. After warranty expires,Tech 21 will
repair defective unit for a fee.
ALL REPAIRS for residents of U.S.: Call Tech 21 for Return Authorization
Number. Manufacturer will not accept packages without prior authorization,
pre-paid freight (UPS preferred) and proper insurance.
FOR PERSONAL ASSISTANCE & SERVICE:
Contact Tech 21, Inc., any weekday from 10:00 AM to 6:00 PM, EST.
MADE IN THE U.S.A.
TECH 21
.
NYC
333 West 52nd Street, NY, New York 10019
212-315-1116 / Fax: 212-315-0825 / www.tech21nyc.com
To Next Page
Need help?
General
