Tech 21 FLY RIG 5 v2 User Manual

POWER REQUIREMENTS
Utilizes included 9V DC, 100-240V universal auto-switching power
supply, 200mA minimum, center negative.
Tech 21 Model #DC9.
NOTE: See page 7 for instructions how to change the prong
assembly for countries other than the US.
For replacements, contact your local dealer/distributor, or Tech 21.
Maximum power consumption of the Fly Rig: approx 150mA.
W
ARNINGS:
* There are no user-serviceable parts inside. Attempting to repair unit is
not recommended and may void warranty.
* Missing or altered serial numbers automatically void warranty. For
your own protection: be sure serial number labels on the unit’s back
plate and exterior box are intact, and return your warranty
registration card or register online.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radi-
ate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARRANTY:
ONE YEAR LIMITED. PROOF OF PURCHASE REQUIRED.
Manufacturer warrants unit to be free from defects in materials and
workmanship for one (1) year from date of purchase to the original
purchaser and is not transferable. This warranty does not include dam-
age resulting from accident, misuse, abuse, alteration, or incorrect cur-
rent or voltage. If unit becomes defective within warranty period, Tech
21 will repair or replace it free of charge. After expiration, Tech 21 will
repair defective unit for a fee.
REPAIRS:
ALL REPAIRS for residents of U.S. and Canada: Call Tech 21 for
Return Authorization Number. Manufacturer will not accept
packages without prior authorization, pre-paid freight (UPS preferred)
and proper insurance. International residents should contact our local
distributor, which can be found on the Support page of our website.
FOR PERSONAL ASSISTANCE & SERVICE:
Contact Tech 21 weekdays 10:00 AM to 5:00 PM, EST: 973-777-6996.
Hand-built in the U.S.A. using high-quality components
sourced domestically and around the globe.
T: 973-777-6996 • F: 973-777-9899
E: info@tech21nyc.com • W: tech21nyc.com
©2019 Tech 21 USA, Inc.

Tech 21 FLY RIG 5 v2 Specifications

General

Type	Multi-effects pedal
Weight	1.5 lbs (0.68 kg)
Dimensions	12.5 x 5.5 x 2.5 inches
Bypass	True Bypass
MIDI	No
USB	No
Effects Types	Delay, Reverb
Inputs	1 x 1/4"
Outputs	1 x 1/4"
Power Supply	9V DC (included)
Depth	5.5"
Effects	Delay, Reverb

Summary

POWER REQUIREMENTS

WARRANTY

REPAIRS

ALL REPAIRS for residents of U.S. and Canada

Instructions for US/Canada repairs, including Return Authorization Number and preferred shipping.

PERSONAL ASSISTANCE & SERVICE

TECH 21, THE COMPANY

PRODUCT OVERVIEW

FLY RIG 5 v2

APPLICATIONS

As a PRE-AMP or STOMPBOX with a guitar amp

Connecting the Fly Rig 5 in-line with a guitar amp's input, discussing tone stack interaction.

For DIRECT RECORDING or DIRECT to PA

Connecting directly to mixers, workstations, or computers for recording and live sound.

GOOD TO KNOW BEFORE YOU START

SIGNAL FLOWS RIGHT TO LEFT

Understanding the signal path from input to output on the device.

THE INS AND OUTS

1/4" INPUT

Specifications for the instrument level input, designed with tube amp sensitivity.

CRITICAL WARNING: SPEAKER OUTPUT

Critical warning against connecting speaker outputs to the Fly Rig input to prevent damage.

1/4" UNIVERSAL OUTPUT

Unbalanced low Z output for guitars, mixers, and computers.

BALANCED XLR OUTPUT & GROUND CONNECT SWITCH

Balanced low Z output with ground lift switch for connecting to mixers.

LEVEL CONTROLS

SET LEVEL CONTROLS FOR UNITY GAIN

Setting level controls for consistent volume in bypass and active modes.

RELATIONSHIP OF THE LEVEL CONTROLS

How the last level control in the signal path determines overall output.

REVERB LEVEL CONTROL AS CLIP WARNING

Reverb control acts as a clip warning for input overload.

GUIDE TO FUNCTIONS and CONTROLS

SANSAMP Sections Overview

Overview of SansAmp technology for direct connection or augmenting amps.

PLEXI/CALI SansAmp Section

Provides Plexi or '70s high gain amp tones with Drive, Tone, Level controls.

BLONDE SansAmp Section

Offers Blonde Character Series tonality with 3-band EQ, Level, and Drive.

EQ Controls: LOW, MID, HIGH

On-board post-EQ controls for bass, mid, and treble frequencies.

SPEAKER SIMULATION

Integral part of SansAmp for smooth, even response simulating a miked cabinet.

PRE/POST BOOST

Switchable boost for drive, distortion, or volume punch for solos.

DELAY Effects

Vintage tape echo voiced delay with Time, Repeats, and level controls.

DUAL-FUNCTION TAP/REVERB FOOTSWITCH

Engages Tap Tempo by tapping; holds to engage/disengage Reverb.

REVERB Control

Provides a smooth sweep for desired reverb amount; Size switch selects room type.

OTHER GOODIES

CHROMATIC TUNER

Engages tuner via footswitch, mutes signal, shows tuning status with LEDs.

EFFECT LOOP

Post-SansAmp, pre-effects loop for external pedals.

NOTEWORTHY NOTES

Using Fly Rig 5 with Power Engine 60

Connecting Fly Rig 5 to Power Engine 60 and grounding considerations.

Using Fly Rig 5 with Power Engine Deuce Deluxe

Connecting Fly Rig 5 to Power Engine Deuce Deluxe.

Control Sensitivity

Controls are sensitive; start with lower settings and adjust.

Settings for Interacting with Other Gear

Settings may vary greatly depending on connected gear and usage.

Low Noise Levels

Tips for minimizing noise, including instrument volume and pickup selection.

Placement Notes

Guidance on placing effects before or within the Fly Rig's effect loop.

Buffered Bypass Benefits

Explanation of the benefits of buffered bypass over true bypass.

Custom Actuators

Information on the smooth, silent-switching actuators used in pedals.