What to do if the TECH Moon Cell Phone battery won't charge?
If your TECH Moon battery isn't charging, ensure the charger is properly connected, and the charging icon appears on the screen. Make sure the battery is correctly inserted and that the surrounding temperature is normal. If the battery is worn out, charge it when the phone indicates low battery. If the battery or charger is damaged, you should contact a service center.
Why can't I make a call on my TECH Cell Phone?
If you can't make a call on your TECH Cell Phone, first check if the network is working correctly and that you're within range of network services. Verify that your SIM card is inserted correctly and can be used normally. Also, ensure call barring is not enabled in your settings and that the keyboard isn't automatically locked. If locked, press the left soft key and the * key to unlock it.
How to fix no sound when a call comes on TECH Moon Cell Phone?
If there's no sound when a call comes to your TECH Cell Phone, check if the phone is in silent mode and switch to 'ring high' or 'ring high and vibrate'. Ensure the ring volume isn't too low by turning it up. Also, verify that call forwarding is not enabled.
How to fix TECH Moon that does not turn on?
If your TECH Cell Phone doesn't turn on, ensure you press and hold the power key for more than 2 seconds. Check if the battery is exhausted and needs charging, or if the battery is not installed correctly. Also, make sure you are entering the correct security password.
Why is the call quality so poor on my TECH Moon?
If you're experiencing poor call quality on your TECH Cell Phone, it could be due to a fluctuating signal, especially if you're moving at high speed. Try to find a location with a stronger signal. If you are in an area with poor signal coverage, move to an open area.
What to do if I can't answer a call on my TECH Moon?
If you can't answer a call on your TECH Cell Phone, check if the call forwarding option is enabled and cancel it if necessary. Also, verify whether the call barring option is set, and if so, cancel incoming call barring or roam blocking incoming calls.
Why isn't the network showing on my TECH Moon?
If your TECH Cell Phone isn't showing the network, ensure the SIM card is installed correctly. Make sure the contact between the SIM card and the phone is clean. Also, check if the SIM card is outdated. If the network is weak, move to a location with a stronger signal.
Why does my TECH Moon Cell Phone automatically turn off?
If your TECH Cell Phone automatically turns off, check if the auto-off feature is enabled and disable it if necessary. Ensure the battery is charged, as a depleted battery can cause this issue. Also, make sure the battery is properly installed according to the user manual and that you are entering the correct security password.
How to increase call volume on TECH Cell Phone?
If the call volume on your TECH Cell Phone is too low, simply increase the volume during the call.
What to do if TECH Moon Cell Phone can't recognize the storage card?
If your TECH Cell Phone can't recognize the storage card, make sure the memory card is inserted correctly according to the manual's instructions. If it still doesn't work, the storage card may be damaged, and you should replace it.
General| Brand | TECH |
|---|---|
| Category | Cell Phone |
| Battery Capacity | 5000 mAh |
| 5G Support | Yes |
| Water Resistance | IP68 |
| Storage | 128GB |
Explanation of on-screen icons.
Instructions to power the device on and off.
Steps for initiating phone calls.
How to handle incoming calls.
Adding new entries to the contact list.
Composing and sending SMS/MMS.
Creating a new Short Message Service (SMS).
Entering website addresses.
Using the built-in camera.
Playing audio files.
Configuring call-related settings.
Managing device security features.
Setting and managing PIN codes.
Activating the Guardlock anti-theft feature.
Steps to resolve power-on issues.
Solutions for not being able to answer calls.
Safety guidelines for battery usage.
Guidelines for phone use close to the body.
Specific SAR values and FCC requirements.
To Next Page