57
New Connection
¾ Itsafety: Set whether to enable the security possible.
¾ Username: Modify the user name of the network.
¾ Password: Set the connection password.
¾ APN: Set the port name of the access network.
¾ Gateway IP Address: Set network IP address.
¾ Port gateway: Set the network port.
¾ Rename: Modify the network account name.
¾ Set as homepage: Set the address of the website homepage.
¾ Advanced Settings: Configuring the DNS address and the type of
network.
Add to the list: You can add multiple accounts default network.
Search: Find the network configuration recorded in the nearby areas, which
can be used directly after being searched.
Delete: Delete the selected network account.
Edit: Edit the selected network account.
7.6.3 refers storage Pque
You can choose where to save the image files, music or video from the Internet.
7.6.4 GPRS establishment
You can choose to open or GPRS always open when needed.
7.6.5 Restore Defaults
WAP settings reset back to the factory.
8. Multimedia
8.1 Camera
Enter the main menu, and select [Camera] to enter the camera preview screen.
8.1.1 Capturing a photo
In the capture screen preview, press 【OK key】to take a picture.
Capture setting
In the capture screen preview, select <Option> To then process the transactions.
Vacation capture mode: Albe to activate the auto capture mode or not.
Photos: Enter Vierwer image to see the photos captured.
Camera settings
¾ Flash: Set the flash.
: In
: Auto
: Off
¾ Contrast: Adjust the contrast level.
¾ Anti-Flicker: 50 Hz and 60 Hz are available for you to choose.
¾ Delay Timer: After seting the time delay, press 【OK key】while taking
pictures, the screen displays a preview screen countdown and automatically
takes a picture when the time runs out.
: Off
: 3 seconds
: 10 sec
¾ Cont shooting: Set to continuously shot images.
To Next Page
Loading...