To charge the device plug the Mini USB charging cable*
(*included in delivery) in the Mini USB charging port, and the
other side plug into the car USB charging adapter*. Then plug
the adapter into the cigarette lighter socket of your vehicle.
Charging time ~5 hours. During charging the LED shines in
RED. When the battery is fully charged, the LED turns off.
Then disconnect the device from the charging cable.
This clip is for secure fastening of the device, e.g. to the sun
visor of a vehicle.
Inserting the battery
This device has a replaceable rechargeable 600mAh battery. The battery is inserted at the
back of the device into the battery compartment by removing the cover in direction of the
arrow. Take attention to the correct polarity when inserting the battery. Then close the battery
compartment. Only use the original battery to maintain the operability of the device.
Checking the power supply
First, check whether the output voltage of the external power supply matches the
specifications of the product rating label of the device. Disconnect from the power supply
during thunderstorms, any malfunction during use and before each cleaning, in order to
protect the electronics from overvoltage and destruction. Disconnect the USB cable from
the USB port by the plug only (never pull on the cable itself!).
Charging: Before first use charge the device!
The battery must be fully charged before before the first use (~2.5–3 hours). For charging
use the enclosed Mini USB charging cable (see description under No. 7). We recommend
to fully charge the batter at least every 2–3 month, even if the device is not used.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
