Switch ON and OFF
To turn ON the device press and hold long the Multifunction button (5).
To turn OFF the devicee press and hold long the Multifunction button (5).
Bluetooth Mode
Connect the handsfree system with a mobile phone
a) For a successful Bluetooth connection between a mobile phone and the handsfree
system, first make sure that your mobile phone is Bluetooth capable.
b) If yes, you first have to activate the Bluetooth function on your mobile phone. Then
switch ON the handsfree system. The LED (2) will now start to flash BLUE and RED
alternatively. Your device is now ready for connection.
c) Search with your mobile phone for Bluetooth enabled devices. Then choose the device
with the name “TECHNAXX BT–X22” from the list. (If you are asked for a password type in
the original password „0000“). Now the Bluetooth connection will start.
d) After a successful connection, the LED flashes BLUE every 3 seconds. The handsfree
system now is in Standby mode.
e) In case the Bluetooth connections fails, switch OFF the handsfree system and try again
from No. b).
Bluetooth distance
The Bluetooth connection has a distance of approx. 10m. Upon further distance the sound
quality becomes poor and the Bluetooth connection is lost.
Note: The sound quality is also dependent on the Bluetooth enabled device which is
connected to the handsfree system.
Connect further mobile phones
This handsfree system can be connected with up to 2 mobile phones simultaneously. For
connecting further mobile phones, press and hold the Multifunction button (5) approx. 3
seconds. If the LED starts flashing BLUE and RED alternately, the handsfree system is
ready to connect. Then activate the Bluetooth function on your mobile phone and select the
handsfree system with the name “TECHNAXX BT–X22” from the list to connect.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
