Technaxx DigiTape DT-01 User Manual

Technaxx
®
DigiTape DT-01
User Manual
The Declaration of Conformity for this device is under:
www.technaxx.de/ (in bottom bar “Konformitätserklärung”)
Introduction
Rediscover old songs with the DigiTape DT-01 by turning your tapes into MP3’s to use
on your computer, iPod or in the car! The DigiTape DT-01 is a portable, handheld USB
tape player that works with all kinds of tapes. It has an easy-to-use USB connection
for converting the music on your tapes into MP3 files. You can listen to MP3’s on your
computer, load them onto your portable music player, or record them onto a CD and
listen in your car. Its portable size allows it to fit in virtually any bag and enables you to
play and transfer music anywhere. It runs on battery or USB power when connected
to your computer for flexible operation. This powerful yet easy-to-use programme
guides you through transferring your Music and even can integrate with your iTunes
Music Library. In addition to transferring your tapes. DigiTape DT-01 has an audio
output that enables you to listen on your stereo, headphones, or other speaker
systems for hours of enjoyment!
Features
 Rediscover your old audio-cassette tapes on the go
 Convert your old mix tapes and cassettes to MP3 to Playback on iPods/MP3
players or burn to CD
 Portable design fits in any bag and enables you to play/transfer anywhere
 Plug & Play USB device, no drivers required
 Flexible battery or USB-powered operation
 Comes with Converter software to guide you through transfer
 Audio output: listen on stereo, headphones or other speaker system
Inserting and replacing the batteries
If you wish, you can run the device via batteries. To insert the batteries, slide back
switch 1 to open the device.Open the battery compartment and insert 2x AA battery
(making sure the battery is correctly aligned ) and replace the battery compartment.

Technaxx DigiTape DT-01 Specifications

General

Type	Cassette Player
Model	DT-01
Recording Formats	MP3
Battery Type	AA
Output	3.5mm headphone jack
Connectivity	USB 2.0
Dimensions	112 x 80 x 31 mm
Playback Formats	Cassette
Power Source	USB
Features	Auto-reverse
Supported OS	Windows
Headphones	Included

Summary

Introduction to DigiTape DT-01

Inserting and Replacing Batteries

Description of Parts

Hardware and Software Installation

Hardware Installation

Windows OS automatically installs the driver upon USB connection. Wait for system notification.

Software Installation

Install the provided Converter software from the CD to transfer audio files to your computer.

Operation Guide

Initial Audacity Setup

Select language and click OK. Configure audio device settings in Preferences.

Recording and Exporting MP3

Record audio using the red key, stop with yellow key, then export as MP3 file.

MP3 File Tagging

Edit ID3 tags for the MP3 file including title, artist, album, genre, and year.

Safety and Disposal

Battery Safety Precautions

Handle batteries with care, keep away from children, and never dispose of them in fire.

Environmental Protection

Do not dispose of the device or batteries with domestic waste. Clean with a soft cloth.