Technaxx FMT100 - User Manual

Technaxx
®
* User Manual
FMT100 Transmitter
The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares that this device,
to which this user manual belongs, complies with the essential requirements of the
standards referred to the Directive RED 2014/53/EU. The Declaration of Conformity you
find here: www.technaxx.de/ (in bar at the bottom “Konformitätserklärung”). Before using
the device the first time, read the user manual carefully.
Turn OFF nearby Bluetooth devices to avoid signal interference!
Service phone No. for technical support: 01805 012643 (14 cent/minute from German
fixed-line and 42 cent/minute from mobile networks). Free Email: support@technaxx.de
Features
 FM Transmitter for SD cards and USB flash drives up to 32GB
 USB input & audio jack to read SD/USB directly and to connect it with MP3
devices
 Supports MP3 music files
 Display (LCD 3.5x2.5cm) shows frequency information
 Saves frequency and music title
 Easy handling and installation (Plug & Play)
Operation
1. Insert transmitter to 12V car cigarette socket power.
 You take a normal SD card or a USB flash drive and copy the MP3 files from the
PC directly on the memory media. Do not (!) create folders, only copy the music
files.
 Search for a free frequency in the car radio (means you hear a hissing and no
radio) and save this frequency on one of the storage spaces of the car radio.
 Adjust the same frequency on the device with the |<< or >>| key and confirm it
with the „CH“ button.
 Plug in the memory media (SD card or USB flash drive) and the playback starts
automatically. Please take a look for the correct card position – plug it into the
device with the contact area on top.
(Normally the device only reads SD cards up to 4GB, but we also tested it
successfully with SDHC cards up to 32GB.)
Important is the FAT32 formating and that the files are „normal“ MP3 files
(no .wma files or files coded with DRM).

Summary

Features and Operation

Device Features Overview

Lists key capabilities of the FM transmitter, including media support and display.

Connecting to Power and Media

Instructions for inserting the transmitter into a car socket and preparing media.

Automatic Playback and Frequency Display

Details on how playback starts automatically and frequency is shown.

Frequency Adjustment and Selection

Guidance on using the CH keys to tune the transmission frequency.

Playback Control and Modes

Explanation of pause/play functions and playback modes (ALL, ONE, RAN).

Track Navigation and Volume Control

How to select previous/next tracks and adjust volume.

Remote Control Usage

Remote Button Functions

Details the functions of each button on the 20-key remote control.

Remote Operation Examples

Explains setting frequency, selecting tracks, and changing EQ modes.

Maintenance and Safety

Remote Battery Replacement

Step-by-step guide on how to replace the battery in the remote control.

General Safety Warnings

Crucial precautions for safe operation, handling, and environment.

Environmental Protection and Cleaning

Guidelines for responsible disposal, cleaning, and material recycling.

Technaxx FMT100 Specifications