Technaxx TX-113 User Manual

 Press the M button on the device or the MENU button on
the remote control to save the settings and exit.
Noise cancel
 Press the ▲▼ buttons, to go to the NOISE REDUCTION
settings. Then press the OK button to enter the NOISE
REDUCTION settings.
 Press the ▲▼ buttons, to select the level of noise reduction,
and then press the M button on the device or the MENU button on
the remote control to save the settings and exit.
Image projection mode
Image flip  Press the M button on the device or the the MENU
button on the remote. Press ▲▼ to reach projection mode. Press
the OK button to rotate the image.
Mute
Mute  Press the Mute button repeatedly to close or to open the
voice signal.
Sound
 Press the M button on the device or the MENU button on the
remote control to enter the MENU.
 Press the ◄ ► buttons to go to the SOUND settings.
 Press the ▲▼ buttons to choose the items you need to
adjust and then press the ◄ ► buttons to adjust the values of the
single items. Press the M button on the device or the MENU button
on the remote control to confirm and exit.
Auto Volume
 Press the M button on the device or the MENU button on the
remote control to enter the MENU.
 Press the ▲▼ buttons, to select AUTO VOLUME.
Then press the OK button repeatedly to turn off or on the AUTO
VOLUME settings. Press the M button on the device or the MENU
button on the remote control to confirm an exit.

Technaxx TX-113 Specifications

General

Number of colors	16.78 million colors
Native aspect ratio	-
Projection distance	1 - 5 m
Projection technology	LED
Contrast ratio (typical)	2000:1
Screen size compatibility	32 - 176 \
Projector native resolution	800x480
Lamp power	50 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	40000 h
Focus	Manual
Focal length range	- mm
Full HD	No
Supported video modes	480i, 480p, 576i, 720p, 1080i, 1080p
Supported graphics resolutions	800 x 600 (SVGA), 1024 x 768 (XGA)
AC (power) in	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	0
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB
Noise level	54 dB
RMS rated power	2 W
Audio formats supported	AAC, MP3, WMA
Image formats supported	BMP, JPEG, PNG
Video formats supported	AVI, DIVX, M-JPEG, MKV, MOV, MPEG1, MPEG2, MPEG4, RM, RMVB, VOB
Number of built-in speakers	2
Placement	Desktop
Product type	Standard throw projector
Product color	White
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Cables included	AC, HDMI
Remote control type	IR

Weight and Dimensions

Depth	150 mm
Width	204 mm
Height	86 mm
Weight	1014 g