Technaxx TX-113 User Manual

 Between the remote control and remote control receiving host
window, do not put any items, In order to avoid blocking the signal.
 Point the remote control to the left side of the device or the
projection screen, to receive the Infrared Radiation.
 Such as long-term when not in use take out the battery, remote
control to prevent battery leakage corrosion.
 Do not put the remote control in high temperature or damp
places, in order to avoid damage.
 Power on / Power off
After the device gets power through the adapter, it goes into stand-
by status:
 Press the POWER button on the device or on remote control to
turn the on the device.
 Press the POWER button again to turn off the device.
 Pressing the POWER button once again can shut down the
engine power. TX-113 will stay in standby as long as it is
connected with the power socket. If you do not use the device for a
long time, take the power cord from the power socket.
 Press the M button on the device or the MENU button on the
remote control, to show the MENU screen.
 According to the remote control or the ◄ ► buttons on the
projector you need to adjust or set level menu items, the menu of
the selected icon will brighten.
 According to the remote control or the ▲▼ buttons on the
device in the lower menu choice you need to adjust the menu item.
 Then press the OK button on the remote control or the OK
button on the device, to activate the selected icon menu at
secondary menu.
 Press the ◄ ► ▲▼ buttons, to adjust the parameter values for
the selected menu item.
 Repeat the second to fifth step to regulate other MENU
items, or directly click MENU or EXIT button to EXIT a single
interface.
 Multimedia boot screen
When the projector starts working, the screen displays takes about
10 seconds to come into the multimedia screen.

Technaxx TX-113 Specifications

General

Number of colors	16.78 million colors
Native aspect ratio	-
Projection distance	1 - 5 m
Projection technology	LED
Contrast ratio (typical)	2000:1
Screen size compatibility	32 - 176 \
Projector native resolution	800x480
Lamp power	50 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	40000 h
Focus	Manual
Focal length range	- mm
Full HD	No
Supported video modes	480i, 480p, 576i, 720p, 1080i, 1080p
Supported graphics resolutions	800 x 600 (SVGA), 1024 x 768 (XGA)
AC (power) in	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	0
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB
Noise level	54 dB
RMS rated power	2 W
Audio formats supported	AAC, MP3, WMA
Image formats supported	BMP, JPEG, PNG
Video formats supported	AVI, DIVX, M-JPEG, MKV, MOV, MPEG1, MPEG2, MPEG4, RM, RMVB, VOB
Number of built-in speakers	2
Placement	Desktop
Product type	Standard throw projector
Product color	White
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Cables included	AC, HDMI
Remote control type	IR

Weight and Dimensions

Depth	150 mm
Width	204 mm
Height	86 mm
Weight	1014 g