Technaxx TX-SW7HR

3
Product overview
1
Display
4
Thermometer sensor
2
Button
5
Charging pins
3
Heart rate sensor
NOTE: The device should be charged at least 1 hour before
use.
Start up
Connect the Smartwatch with the magnet charger or press down the
button (2) for 3 seconds.
Install FunHealth APP on your smart phone
Search for the "FunHealth"
app in the Google Play
Store/Apple App Store or scan
the QR code shown in the
instructions or on the
smartwatch to start the
installation.
Connect the Smart watch with the FunHealth APP
Wait until the device is fully charged. Activate the Bluetooth and GPS of
your Smartphone.
1. Open the FunHealth APP and confirm all requests to get the most
out of the APP.
2. Press „Add Device“ in the top right corner of the FunHealth App.