SPECIFICATION
TE-10D
Operating temperature range -40 to +120°C
Temperature range without cooling mechanism Ambient +5 to 120°C
Temperature selection Digital
Temperature display Digital LED
Temperature stability ±0.01°C
Set point accuracy ±1°C
Method of control PID
Temperature sensor PRT
Nominal heater power 230V 1000W
120V 1000W
100V 850W
Maximum watts density 7.6 W/cm
2
Pump capacity Maximum flow 10 l/min
Maximum pressure 145 mbar
The TE-10D has passed
EN 50081-1:1992 Electromagnetic Compatibility; Generic emission standard.
EN 50082-1:1992 Electromagnetic Compatibility; Generic immunity standard (Performance criterion B).
The specification was achieved in an 8 litre bath with a ball blanket according to DIN 58966.
Protection against hazards IP30
Safety device cassification 2
25
To Next Page
Loading...
